Asphalt Shingle Roof Replacement – Installation and Insights
When you need to have a new asphalt shingle roof installed, you should know how the job is done. Not only is it the most common roofing material for residential homes and commercial buildings, but it is also the best one for a variety of different purposes. In this article, we’ll discuss how to get the job done properly.
The initial step in the process is to assess the situation. If you live in an area where temperatures regularly drop below freezing, you might consider getting the roof inspected before it is replaced. Quality asphalt shingle can hold up well if it has been properly installed over the cold months. Inspections are cheap and can go a long way toward determining whether your roof will be a good choice for your needs.
Asphalt shingle roof installation requires the same processes as other types of construction, such as foundation and chimney installations. In fact, once the asphalt shingle is laid on the roof, you must repeat the foundation and chimney work in order to secure the roof to the foundation. This type of roof installation does not pose any safety risks since the asphalt is permanently attached to the building.
The shingles that are used in asphalt shingle roof replacement are laid on the roof using a batten-and-grid system. A good quality siding will have seams that are numbered and correspond to the number of each batten used. This is so you can find the number to make sure that the same siding will fit on the replacement roof and that it matches the old siding properly.
The third step involves covering the new roof with insulation. Most asphalt shingles are non-combustible and are not damaged by a large fire. So you don’t have to worry about them catching fire while your home burns down around you. You can simply place the new roof insulation on top of the old insulation.
After covering the roof with insulation, you can finally start laying the asphalt shingles. If the roof has been previously replaced, you can move the old asphalt shingles directly onto the new roof. If not, lay the new asphalt shingles directly on top of the old. This step is necessary because the old shingles are not bonded to the new roof.
There are two different types of asphalt shingle that are used in roof replacement. These are pressed and rolled. A pressed shingle will be pressed into place by the installer while a rolled shingle is rolled into shape. Both of these types of shingles can be installed by a professional and are durable.
Before installing the new asphalt shingle, there are a few considerations. One of these concerns the type of install that will be easiest. You should first decide whether you want the roof replaced on the south or north side of the home. You will also need to decide whether you want the roof replaced from the ground up or from the attic.
If the roof is being replaced from the ground up, there are fewer factors to be considered when laying the new asphalt shingles. However, if the roof is being replaced from the attic, there are many more choices.
Since there are many choices available for covering the new roof, it is important to choose an installer who specializes in covering roofs like yours. This type of specialist will be familiar with the roofing materials that are commonly used in your area. He or she will also know the proper installation techniques for the type of roof that you want.
Finally, you will want to make sure that the contractor you hire offers installation pricing and estimates. Even if you have used a contractor before, it is a good idea to ask for a price quote. When a price quote is offered, you can compare the price to what a good roofing specialist would charge for similar work.
While asphalt shingle roof replacement may seem like a complicated procedure, it is something that can be handled by a good contractor. In this situation, asking for a price quote will ensure that you are choosing a qualified expert.